Palm oil processing machine

Palm oil processing machine


The palm oil is contained in palm pulp with high moisture content and rich lipase. Usually we adopt the directly palm oil making machine press method to produce it, and this technology is very mature. After processing of sterilizing, threshing, digesting, pressing, clarifying, drying etc. by the palm oil machine, the FFB will turn into clarified crude palm oil.
 
  • Details

  • palm oil machine

    The palm oil is contained in palm pulp with high moisture content and rich lipase. Usually we adopt the directly press method to produce it through palm oil processing machine , and this technology is very mature. After the processing of sterilizing, threshing, digesting, pressing, clarifying, drying etc. by the palm oil machine, the FFB will turn into clarified crude palm oil.
     
    WEIGHBRIDGE STATION:
    The fresh fruit bunches (FFB) will be weighted firstly by the weight bridge, when the truck transports them into the factory.
    LOADING RAMP STATION:
    After weighting, the FFB will be loaded into the conveyor by loading ramp (This station can adopt automatic ash removal device. Feed with the automatic hydraulic door, and load with the method of infrared detecting material.).
    STERILIZING STATION: 
    Then the FFB will be conveyed to the vertical / horizontal sterilizer. FFB will do sterilization treatment in sterilizer for several times to avoid the lipase hydrolyzing.
    THRESHING STATION:
    After sterilizer, the FFB is distributed to bunch conveyor by the mechanical bunch feeder and then enter the thresher machine for separating the palm fruit and bunch.
    EMPTY BUNCH TREATMENT:
    The empty bunch is conveyed to empty bunch loading platform and then transported to outside the factory area at fixed period. The empty bunch could be as fertilizer or reuse.
    PRESSING STATION:
    The palm fruit passed sterilizer and thresher processing will be sent to digester and then enter the special screw press to press out the crude palm oil (CPO) form the pulp.
    CLARIFICATION STATION: 
    The pressed crude palm oil contains a lot of water and impurity, which need to be clarified by sand trap tank and the vibrating screen, then the CPO will be sent to clarification station treatment section.
    PALM OIL STORAGE:
    After screen and sand trap tank, the crude palm oil will be sent to crude oil tank for heating processing, then be pumped into continuous clarification tank for separation. The purified oil will sent to pure oil tank and the sludge oil will be sent to sludge tank, after that the sludge oil should be pumped into the sludge oil centrifuge, and the separated oil will enter the continuous clarification tank again. The pure oil in the pure oil tank will be sent to the pure oil centrifuge for dehydration, and then enter the vacuum dryer, at last the dried oil will be pumped into collection tank.
    NUT AND KERNEL: 
    The fiber, nut and kernel separation are used the most mature winnowing system, and can be equipped with a complete set of automatic control system for the wind pressure and the air quantity.
    BOILER STATION :
    For the wet fiber cake which be produced by screw press, after separating nut, it will be sent to boiler house to burnt.


RELATED PRODUCTION
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
Name:*
E-mail:*
Country:*
Tel:*
Company:
Message: *
Copyright © 1988-2015 by HUA TAI Food & Oil Machinery Co. LTD All rights reserved
Tel: +86-371-86236366 E-mail:mary@oilmachineworld.com google Sitemap